Animal Surgical Devices
Med Vet International 2.4mm x 30mm Cortical Self-Tapping Screws, J1073K, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Med Vet International 2.7mm Coritcal Self-Tapping Screws, 28mm x 2.0mm, J1072LT
2.7mm Coritcal Self-Tapping Screws, 28mm x 2.0mm
Euthanex Sure-Seal Mouse/Rat Chamber, 9"" L x 4"" W x 4"" H
Sure-Seal Mouse/Rat Chamber, 9" L x 4" W x 4" H, heavy-duty acrylic, gasket seal, locking latch. Gas is exhausted through an outlet port that is tube-connected to a charcoal filter canister. Accommodates oxygen-flush before transferring animals out of chamber.
World Precision Instrument Hot Plate Analgesia Meter
Latency testing in rodents
To use the Hot Plate Analgesia meters, simply place the animals on a black anodized, aluminum plate (11 x 10.5 x 0.75”, 275 x 263 x 15 mm) and set the plate’s surface temperature to the desired set point (up to 75˚C). The plate maintains a consistent temperature throughout the test.
INSOURCE INC 36X48 WH DRAPE SHEET CS/100
Manufacturer: Henry Schein Inc. 36X48 WH DRAPE SHEET CS/100
Med Vet International Locking Screw, 2.7mm x 18mm, J1133G
Locking Screws and Plates. A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 2.7mm 18mm
Med Vet International Trocar-Trocar I. M. Pin, 5/64" x 7", J0250B
Highest quality type 316L stainless steel IM pins. Available in the points and diameters listed below. When ordering, please match diameter with point style number. Made in U.S.A.
Med Vet International Cancellous Screws 3.5mm x 18mm, J0423E, 6 Pack
3.5mm Cancellous Screw. 1.75 Pitch. The coarser thread has a much bigger "bite" into the bone. Use on metaphyseal or other cancellous bone. The screw needs its own tap. (JOR409c)
Med Vet International Cancellous Screw, J0416HC, 2.2mm x 20mm, Each
2.2mm Cancellous Screw. 1.5 pilot. 1.5 hex head. Self tapping. Single pack.
NEOGEN ANIMAL SAFETY DIVISION LARGE CADAVER BAGS 30X50 50/CS
NC2041279 LARGE CADAVER BAGS 30X50 50/CS